As an Amazon Associate I earn from qualifying purchases.1. woleyi
Woleyi 3 Pack 8CM Adhesive Dashboard Mount Disk Pad with 3M Sticker for TomTom GO Start Garmin GPS Sat Nav Dash Cam Suction Cup Mount
woleyi - Quickly and conveniently exchange suction mount between windshield and dashboard with the disc. Easy installation: 1 clean the dashboard; 2 remove the protective cover on the base of the disk; 3 Press the disk to the dashboard and leave more than 30 secondds; 4 Attach suction mount on the disc.
Sticky adhesive mounting disk support your suction mount or smartphone & camera securely on dashboard. 3 packed with 1-year warranty. Us genuine 3m materials, adhesive mounting disk fits all suction cup mount within 3. 15 inch in diameter for adhering to dashboards.
2. MeetRade
MeetRade 4PACK Dashboard Mounting Pad Disk With PU Sticky Adhesive Replacement Kit 95mm Circle Heat Resistant Double-Sided Stickers for Suction Cup Car Phone Holder Disc & Windshield GPS Dash Cam
MeetRade - Where to use? when you mount your car phone mount on dashboard, Your sucker is not strong enough and fall off often? Try MeetRade Mounting pad and super adhesive for lock sucker. Press down repeatedly to increase the contact of the adhesive with the substrate.
The suction cup can be stably fixed on it and never fall off. Easy to installprovided rounded rectangle raised label to easily peel off the red release film of the adhesive pads. Heavy duty transparent double-sided adhesive tape can be used for smooth surfaces such as glass, black TPU disc it can directly used on the dashboard, etc.
2 pack package include 2 pack of 95mm diameter base disc+2 Pack of 80mm Clear Double sided adhesive+2 Free cleaning Pad. Note: please don't touch the adhesive with your finger.
When using, stick the adhesive to the dashboard pad mounting disk or to the suction cup base directly, first easily peel off the white release film, then peel off the other red side film and stick to your car dashboard. Never fall again! two kinds materials, tile, and leather surface, stainless steel, or some other not smooth surface, so that the suction cup bracket can firmly fixed on it and will never fall. Select a certain place to instal, wait 12 hours after install.
3. Anteel
Anteel Dashboard Pad Mounting Disk Sticky Adhesive Replacement Kit, 6pcs 3.15"80mm Circle Heat Resistant Double-Sided Stickers for Suction Cup Car Phone Holder Disc & Windshield Dash Cam
Anteel - 6pcs clear adhesives replacementanteel offers 6 pcs round clear sticky adhesive padsDiameter: 3. 15"/80mm for attaching dashboard pad mounting disk of your suction cup dashboard phone mount. 6 pcs alcohol prep padsto maximize adhesive contact, please clean the adhesive surface with alcohol pad before use and let it dry, free of contaminates.
It also resists heat and moisture, easy peels off without leaving any sticky residue behind. You can also adhere the transparent adhesive to the suction cup directly, not affecting the look of the suction cup.
Easy to installprovided rounded rectangle raised label to easily peel off the red release film of the adhesive pads. Compatible with most suction cup dashboard mount and other windshield long arm mount, camera mount, EZ Pass/I-Pass/SunPass holder, GPS holder, ETC, wireless charger base, dash camera mount holder etc on the market.
And wait at least 24 hours to use for the better adhesion. Cut into any size you need & compatible with suction baseyou can cut pads into smaller pieces if need. Press down repeatedly to increase the contact of the adhesive with the substrate. When using, first easily peel off the white release film, stick the adhesive to the dashboard pad mounting disk or to the suction cup base directly, then peel off the other red side film and stick to your car dashboard. Please wait 24 HOURS to use.
| Brand | Anteel |
| Manufacturer | Anteel |
| Height | 0.1 cm (0.04 Inches) |
| Length | 8 cm (3.15 Inches) |
| Width | 8 cm (3.15 Inches) |
| Part Number | Anteel_6D8A |
4. pop-tech
Sticky Adhesive Pad Replacement for Car Dashboard Magnetic Phone Mount Base, pop-tech 8pcs 3M VHB Double Sided Sticker Heat Resistance Tape for Magnet Cellphone Holder & Windshield Dash Cam
pop-tech - International products have separate terms, are sold from abroad and may differ from local products, and language of product, including fit, age ratings, labeling or instructions.5 do not touch the adhesive with your hands.
Versatility: stickers can be used on flat hard surfaces, walls, offices, lockers, such as home bathroom mirrors, refrigerators, bedposts, dashboards.
Features? heat resistance: pop-tech's glue adhesive can resist high temperatures up to 120°! It can maintain the best viscosity under high temperature environment. 3 the 3m vhb rubber pad is for one-time use.
2 please ensure that the required surface is clean and dry. 4 it is recommended to wait at least 24 hours to ensure that the sticker has the best adhesion before use. Ease of use: tear off without trace! . Note? 1 please do not stick the 3m adhesive pad on the very soft, textured, rough, oily surface or leather surface.
5. volport
VOLPORT 2pcs 3M Circle Heat Resistant Double Side Tapes Strong VHB Sticker for Suction Cup Car Phone Holder Base, Sticky Adhesive Replacement for Dashboard Pad Mounting Disk, GPS Windshield Dash Cam
volport - Genuine 3m sticky adhesive these phone dashboard car mount backing stickers is high temperature120℃+ resistance in hot Summer Texas, you can use it without worry in hot summer. Easy to installthe replacement kit comes with alcohol wipes to clean the surfaces before applying. Just peel off the old gel adhesive from mount and clean the the surface with alcohol wipe before using the new adhesive, peel off the 3m adhesive film to stick the dashboard pad mounting disk, after the surface is dried, or stick it to the bottom of the suction cup bracket directly and press down repeatedly for 5- 10 minutes for better connecting to the surface, please wait 24 HOURS to use .
Make sure the surface of the chosen area and dashboard pad mounting disk of suction cup phone mount is cleaned completely before applying a new adhesive.
Best car phone mount adhesive replacement. We provide a one-year warranty and if you need any help with our product, 4 x alcohol pads, please do not hesitate to contact us and we will provide you our best after-sale service. Suitable for suction cup car dashboard phone stand and other windshield long arm mount, iphone car mount, ETC, dash camera mount holder, GPS holder, tablet computer bracket, camera mount, wireless charger mount, dashboard toys of suitable diameter.
Easy remove these flexible double sided car suction cup mount self adhesive is esay to remove, you can remove dash tray car mount stand without leaving clear adhesive residue, no tool required. Designed for suction itemsvolport heat resistant 3m sticky adhesives for dashboard pad mounting base disk of suction cup phone mount. Easy to fix your car phone socket base, jeep, truck, heavy duty dashboard mount base, you can stable and secure driving uber, vehicle in bumpy roads.
| Brand | volport |
| Manufacturer | volport |
| Height | 0.99 cm (0.39 Inches) |
| Length | 17.98 cm (7.08 Inches) |
| Width | 8.99 cm (3.54 Inches) |
| Part Number | V-C1AC-N |
6. MeetRade
Stick On Double Sided Heavy Duty Adhesive Pad Disk For Lock Sucker Suction Cup Hook Mounting on Dashboard For xiaomi xiaoyi gopro camera GPS Sat Nav Cam 70mm, MeetRade Adhesive Suction Cup Mount
MeetRade - 3. Size and use: diameter 70mm2. 76 inch, remember you finger don’t touch the adhesive pad. 3. Clean the surface you need to install. 4. Even in a car, just peel it from the side and slowly pull it up. 4. Easy to move: when you need to move it, water resistance, the adhesive can work on the high temp.
The adhesive is easily removable and never leave a residue. Br>high temperature resistance, it also waterproof, so can install the camera out side the house.
Peel the protector film off, fit for almost kind of suction cup! HOW TO USE: 1. Never fall again! 2. Material:made of 3m vhb super strong adhesive, it can help suction cup installs on not totally flat surfaces tightly.
5. Multi-purpose adhesive: this adhesive provide the best solution for your lock sucker hook, car mount and GPS, Also other mounting used. 1. Where to use? your sucker is not strong enough and fall off often? This MeetRade super strong adhesive pad can help your suction cup to lock firmly. Clean the surface of the suction cup by alcohol. 2. Peel the adhesive pad and apply to the suction cup carefully, then apply on.
7. BBTO
GPS Suction Mount, 8 Piece Disc Dashboard Pad Suction Cup Mounting Disc Adhesive Dashboard Mount Disc Stick on Universal Dash Mount Pad for Suction Cup Phone Mount, Sat Nav Dash Cam Holder 3.2 Inch
BBTO - Installation steps: make sure the target place that is ready to place is clean and dry, press the disk down onto the dashboard and press back and forth to increase tightness, then remove the protective cover on the base of the disk, you'd better let it for 24 hours to ensure a strong adhesive grip, finally place your suction cup onto it firmly.
Suitable size: dashboard mount disk pad measures 86 mm/ 3. 4 inch in diameter, it can be widely applied to any suction cup accessories that are smaller than 80 mm/ 3. 2 inch, flexible option for car mount sticky replacement; Carefully check the size before buying.
Compatibility: suction cup mounting disc can be wide applied to smartphone mount, car camera, GPS suction mount and more, please noted the adhesive mounting disk works only with any 80 mm/ 3.2
2 inch or smaller than 80 mm/ 3. 2 inch suction mounting pedestal. Practical gifts: you will get 8 pieces adhesive dashboard mount disc in one set, sufficient quantity to meet you daily using and replacement needs, which are also thoughtful gifts for family and friends. Nice adhesives: made of abs plate and strong adhesive, this disc dashboard pad can attach onto your car and your devices firmly, let your devices don't fly off as you go round corners, easy to use and remove without leaving trace.
| Brand | BBTO |
| Manufacturer | BBTO |
| Weight | 0.14 kg (0.31 Pounds) |
| Part Number | BBTO-Vehicle Mounts-v1493 |
8. volport
VOLPORT 6pcs Double Sided Sticker Pads for Swappable Phone Expanding Base, Extra Super Strong VHB Circle Glue Tape for Mobile Car Holder, 3M Sticky Adhesive Pad Replacement for Collapsible Grip Stand
volport - 1. Last but the most important rule, please repeat this act: peel-if come up-press red film back-peel again. Please contact us immediately if you have any problems, in this situation, please don't not stick adhesion on rugged, texture surface silicone phone case, it may not stick well.2. Volport product comes with 12-months warranty, s10 plus, wall, cars badge, windshield, steering wheel, boat.
Designed for collapsible grip & car mount: volport new 3m adhesive replacement is designed to reuse expanding phone grips stand and dash magnet car holder; 6pcs larger heat resistant round vhb dots for glue the bases of collapsible mount, 2pcs smaller spare circles discs gel pads mounting tape for the back of self magnetic dashboard car holder and glass.
Adhesive can't stick well on phone case, we are here. Important note: here are some problem customer may encountered frequently. Wide applications: volport 3m replacement super sticky adhesive accessories kits can be used at home bathroom mirror, iphone xr, window, locker, shower room, cabinet, dash, lg.
We adopt original black gel, truck, stickiness is 40% stronger than others, jeep, no problem using in hot Summer when you driving car, vehicle, high temperature and low temperature resistance, uber etc. Hard to peel off the red backing film, wait 24 hours after stuck. 2 pieces magnetic phone car holder adhesive pads: two small circle 3m double sided tape tiny foam adhesive disk work with the bottom of dashboard car mount, windshield gps navigation mount, iphone car mount, wall phone holder, dash cam mount holder, 360 magnetic car mount, wireless charger mount, cell phone holder, collapsible phone grip car mount etc.3.
| Brand | volport |
| Manufacturer | volport |
| Weight | 0.02 kg (0.04 Pounds) |
| Part Number | VOLPORT- VM0027US |
woleyi - Quickly and conveniently exchange suction mount between windshield and dashboard with the disc. Easy installation: 1 clean the dashboard; 2 remove the protective cover on the base of the disk; 3 Press the disk to the dashboard and leave more than 30 secondds; 4 Attach suction mount on the disc. Sticky adhesive mounting disk support your suction mount or smartphone & camera securely on dashboard. 3 packed with 1-year warranty. Us genuine 3m materials, adhesive mounting disk fits all suction cup mount within 3. 15 inch in diameter for adhering to dashboards.
MeetRade - Where to use? when you mount your car phone mount on dashboard, Your sucker is not strong enough and fall off often? Try MeetRade Mounting pad and super adhesive for lock sucker. Press down repeatedly to increase the contact of the adhesive with the substrate.
Anteel - 6pcs clear adhesives replacementanteel offers 6 pcs round clear sticky adhesive padsDiameter: 3. 15"/80mm for attaching dashboard pad mounting disk of your suction cup dashboard phone mount. 6 pcs alcohol prep padsto maximize adhesive contact, please clean the adhesive surface with alcohol pad before use and let it dry, free of contaminates.
pop-tech - International products have separate terms, are sold from abroad and may differ from local products, and language of product, including fit, age ratings, labeling or instructions.5 do not touch the adhesive with your hands.
volport - Genuine 3m sticky adhesive these phone dashboard car mount backing stickers is high temperature120℃+ resistance in hot Summer Texas, you can use it without worry in hot summer. Easy to installthe replacement kit comes with alcohol wipes to clean the surfaces before applying. Just peel off the old gel adhesive from mount and clean the the surface with alcohol wipe before using the new adhesive, peel off the 3m adhesive film to stick the dashboard pad mounting disk, after the surface is dried, or stick it to the bottom of the suction cup bracket directly and press down repeatedly for 5- 10 minutes for better connecting to the surface, please wait 24 HOURS to use .
MeetRade - 3. Size and use: diameter 70mm2. 76 inch, remember you finger don’t touch the adhesive pad. 3. Clean the surface you need to install. 4. Even in a car, just peel it from the side and slowly pull it up. 4. Easy to move: when you need to move it, water resistance, the adhesive can work on the high temp.
BBTO - Installation steps: make sure the target place that is ready to place is clean and dry, press the disk down onto the dashboard and press back and forth to increase tightness, then remove the protective cover on the base of the disk, you'd better let it for 24 hours to ensure a strong adhesive grip, finally place your suction cup onto it firmly.
volport - 1. Last but the most important rule, please repeat this act: peel-if come up-press red film back-peel again. Please contact us immediately if you have any problems, in this situation, please don't not stick adhesion on rugged, texture surface silicone phone case, it may not stick well.2. Volport product comes with 12-months warranty, s10 plus, wall, cars badge, windshield, steering wheel, boat.
