As an Amazon Associate I earn from qualifying purchases.1. Kedelak
Kedelak 1.5M Electrode Holder Stick Welders and Ground Clamp Set Welding Machine Clamping Tool Solder Leads Kit
Kedelak - Selected irradiation processing workmanship, which adopts high tenacity rubber material, with fine heat resistance and chemical resistance.
Comes with 2pcs 1. 5m cables, will not break under high strength bending and pulling. Ground clamp is easy to install and practical to use, which is more reliable grounding by using it. Inflaming retarding, eco-friendly, safe and can provide long service time.
Copper welding wire with -free copper conductor, with fine electrical conductivity and low-resistance. Quality electrode holder with insulation heat-resistant handle, ergonomical and comfortable, high temperature resistance, non-conductive, suitable for long-term use.
| Brand | Kedelak |
| Manufacturer | Kedelak |
| Height | 8 cm (3.15 Inches) |
| Length | 45.5 cm (17.91 Inches) |
| Width | 32 cm (12.6 Inches) |
| Part Number | JJE15032 |
2. Jeanoko
500A Electrode Holder Welding Rod Stick Clamp Heavy Duty MMA Welder Electrode Holder with 3Meter 35mm² Cable for MMA ARC Welder
Jeanoko - Welding equipment for grounding: simple structure, submerged arc welding, easy to install and use. Broad range of applications: this 500a tig welding Brass Ground Clamp is widely used in shipyard, curtain wall industry, vehicle manufacturing, steel structure, oil platform, auto parts and other industries.
Excellent performance: this is a type ground clamp is made of die cast brass, which has oxidation resistance and long service life, with good electric conductivity and long durability, is more easier and convenient to use in the practical life.
Suitable for grounding in large current welding of MIG, stud welding, TIG, electric resistance welding, etc.
Regulatory compliance: this mma arc welder Earth Clamp has passed strict factory tests to ensure superior quality, which was designed and manufactured according to international standard. Quality-guaranteed: after many inspections before leaving the factory, the Ground Clamp is entitled with high performance according to strict quality control, the quality is guaranteed, you can use it with peace of mind.
| Brand | Jeanoko |
| Manufacturer | Jeanoko |
| Height | 1 cm (0.39 Inches) |
| Length | 1 cm (0.39 Inches) |
| Weight | 1.67 kg (3.69 Pounds) |
| Width | 1 cm (0.39 Inches) |
| Part Number | Jeanokoh6iq53uw8e610 |
3. EVTSCAN
EVTSCAN Latest 300Amps Electrode Holder 25mm² 4M Cable Welding Rod Stick Clamp Industrial Welding Electrode Holder for MMA ARC Welder
EVTSCAN - Simple structure, easy to install and use. Applicable for grounding in large current welding of MIG, stud welding, TIG, submerged arc welding, electric resistance welding, etc.2021 improved version, vehicle manufacturing, curtain wall industry, Widely used in shipyard, steel structure, oil platform, auto parts and other industries.
The clamp is made of die cast brass, with good electric conductivity and long durability. The product has passed strict factory tests to ensure superior quality.
| Brand | EVTSCAN |
| Manufacturer | EVTSCAN |
| Height | 0 cm (0 Inches) |
| Length | 0 cm (0 Inches) |
| Weight | 1.36 kg (3 Pounds) |
| Width | 0 cm (0 Inches) |
| Part Number | EVTSCAN6pr5etzxqy |
4. PUSOKEI
PUSOKEI 300Amps Electrode Holder 25mm² 4M Cable Welding Rod Stick Clamp Industrial Welding Electrode Holder for MMA ARC Welder
PUSOKEI - Applicable for grounding in large current welding of MIG, electric resistance welding, TIG, submerged arc welding, stud welding, etc. The clamp is made of die cast brass, with good electric conductivity and long durability.
The product has passed strict factory tests to ensure superior quality. Simple structure, easy to install and use. Widely used in shipyard, vehicle manufacturing, curtain wall industry, steel structure, oil platform, auto parts and other industries.
| Brand | PUSOKEI |
| Manufacturer | PUSOKEI |
| Height | 1 cm (0.39 Inches) |
| Length | 1 cm (0.39 Inches) |
| Weight | 1.38 kg (3.04 Pounds) |
| Width | 1 cm (0.39 Inches) |
| Part Number | PUSOKEIu18m4atwqk2870 |
5. Kuuleyn
Welding Pliers Clamp Electrode Holder Copper Lengthened Handle Aggravate Anti-Scalding Anti-Leakage, Stick Welder
Kuuleyn - The electrode holder is made of pure copper, electrode holder can be never magnetically absorbed. Fast heat dissipation, lengthened handle can delay the heating time of the handle. High-quality high-elasticity spring is with long-lasting elasticity and long service life.
Diamond-shaped jaws are used for stable clamping and the electrode is not easy to slip. The welding pliers is designed with unbreakable and durable shell, Welding Clamp can be applicable to shipyard, construction site, etc.
| Brand | Kuuleyn |
| Manufacturer | Kuuleyn |
| Height | 1 cm (0.39 Inches) |
| Length | 1 cm (0.39 Inches) |
| Weight | 0.59 kg (1.29 Pounds) |
| Width | 1 cm (0.39 Inches) |
| Part Number | Kuuleyn0g38nckbi9866 |
6. Ladieshow
Ladieshow 300A Electrode Holder Welding Rod Stick Clamp with 25mm² 4m Cable for MMA ARC Welder
Ladieshow - The product has passed strict factory tests to ensure superior quality. The clamp is made of die cast brass, with good electric conductivity and long durability. Simple structure, easy to install and use.
Widely used in shipyard, oil platform, curtain wall industry, steel structure, vehicle manufacturing, auto parts and other industries. Applicable for grounding in large current welding of MIG, TIG, stud welding, electric resistance welding, submerged arc welding, etc.
| Brand | Ladieshow |
| Manufacturer | Ladieshow |
| Height | 0 cm (0 Inches) |
| Length | 0 cm (0 Inches) |
| Weight | 1.36 kg (3 Pounds) |
| Width | 0 cm (0 Inches) |
| Part Number | Ladieshow8kmzh3dgf7 |
7. ViaGasaFamido
Welding Electrode Holder Stick Welding Stinger Leakage-Prevention Copper Rod Electric Welder Clamp Tool 300A
ViaGasaFamido - Long service lifeour holder was made of high quality plastic material, high reliability. Wide applicationour products is a good helper for welding working which can make sure the safety. The upper and lower clips are made of composite material, which is resistant to high temperature and high flame retardant.
Quality assurance, stable and durable, professional manufacturing, long service life. The upper and lower clips are made of composite material, which is resistant to high temperature and high flame retardant.
Good performanceour products use high-quality pure copper to increase the conductor, and the temperature rise is lower, the conductivity is strong, and protected by strong spring insulation sleeve to ensure that the welding rod is stable and not easy to fall off.
Easy to useour products is a high-quality Welding Electrode Holder, and built to strict quality control standards, as a artistic appearance and simple structure, very friendly to novices. Ergonomically designed for comfort during welding. Ergonomically designed for comfort during welding. Wide applicationour products is a good helper for welding working which can make sure the safety.
| Brand | ViaGasaFamido |
| Manufacturer | ViaGasaFamido |
| Height | 3 cm (1.18 Inches) |
| Length | 21 cm (8.27 Inches) |
| Weight | 0.31 kg (0.67 Pounds) |
| Width | 7.5 cm (2.95 Inches) |
| Part Number | ViaGasaFamidoi3k7u42scf |
8. Jectse
Welder Electrode Clamp Tool,for Arc Welder, 300A Electrode Holder,Heat Resistant Welding Leakage-Prevention Copper Plier Stick Rod Clamp
Jectse - The upper and lower clips are made of composite material, which is resistant to high temperature and high flame retardant. Ergonomically designed for comfort during welding. It is protected by strong spring insulation sleeve to ensure that the welding rod is stable and not easy to fall off.
Use high-quality pure copper to increase the conductor, the conductivity is strong, and the temperature rise is lower. This is a good helper for welding working which can make sure the safety.
| Brand | Jectse |
| Manufacturer | Jectse |
| Height | 3 cm (1.18 Inches) |
| Length | 21 cm (8.27 Inches) |
| Weight | 0.31 kg (0.68 Pounds) |
| Width | 7.5 cm (2.95 Inches) |
| Part Number | Jectse8etbgsz7gc |
9. Bigking
Electrode Holder,300A Electrode Holder Welding Rod Stick Clamp with 25mm² 4m Cable for MMA ARC Welder
Bigking - Application scenarioapplicable for grounding in large current welding of MIG, stud welding, TIG, submerged arc welding, electric resistance welding, etc. Selected materialsthe clamp is made of die cast brass, with good electric conductivity and long durability.
Easy to usesimple structure, easy to install and use. Multipurposewidely used in shipyard, steel structure, curtain wall industry, vehicle manufacturing, oil platform, auto parts and other industries. Professional productionThe product has passed strict factory tests to ensure superior quality.
| Brand | Bigking |
| Manufacturer | Bigking |
| Height | 0 cm (0 Inches) |
| Length | 0 cm (0 Inches) |
| Weight | 1.36 kg (3 Pounds) |
| Width | 0 cm (0 Inches) |
| Part Number | Bigkingcyzxqn0g32 |
10. Fafeicy
Welding Rod Stick Clamp with 25mm² 4m Cable Fit for MMA ARC Welder Used in Shipyard, 300A Electrode Holder
Fafeicy - The clamp is made of die cast brass, with good electric conductivity and long durability. Its quality is guaranteed. Application: widely used in shipyard, oil platform, curtain wall industry, steel structure, vehicle manufacturing, auto parts and other industries.
A great choice for you. The product has passed strict factory tests to ensure superior quality.
Simple structure, easy to install and use. You can use it with confidence. Bring you a new and different using feeling. Applicable for grounding in large current welding of MIG, stud welding, electric resistance welding, TIG, submerged arc welding, etc.
| Brand | Fafeicy |
| Manufacturer | Fafeicy |
| Height | 1 cm (0.39 Inches) |
| Length | 1 cm (0.39 Inches) |
| Weight | 1.38 kg (3.04 Pounds) |
| Width | 1 cm (0.39 Inches) |
| Part Number | Fafeicycvqhr8etya2386 |
Kedelak - Selected irradiation processing workmanship, which adopts high tenacity rubber material, with fine heat resistance and chemical resistance.
Jeanoko - Welding equipment for grounding: simple structure, submerged arc welding, easy to install and use. Broad range of applications: this 500a tig welding Brass Ground Clamp is widely used in shipyard, curtain wall industry, vehicle manufacturing, steel structure, oil platform, auto parts and other industries.
EVTSCAN - Simple structure, easy to install and use. Applicable for grounding in large current welding of MIG, stud welding, TIG, submerged arc welding, electric resistance welding, etc.2021 improved version, vehicle manufacturing, curtain wall industry, Widely used in shipyard, steel structure, oil platform, auto parts and other industries. The clamp is made of die cast brass, with good electric conductivity and long durability. The product has passed strict factory tests to ensure superior quality.
Kuuleyn - The electrode holder is made of pure copper, electrode holder can be never magnetically absorbed. Fast heat dissipation, lengthened handle can delay the heating time of the handle. High-quality high-elasticity spring is with long-lasting elasticity and long service life. Diamond-shaped jaws are used for stable clamping and the electrode is not easy to slip. The welding pliers is designed with unbreakable and durable shell, Welding Clamp can be applicable to shipyard, construction site, etc.
Ladieshow - The product has passed strict factory tests to ensure superior quality. The clamp is made of die cast brass, with good electric conductivity and long durability. Simple structure, easy to install and use. Widely used in shipyard, oil platform, curtain wall industry, steel structure, vehicle manufacturing, auto parts and other industries. Applicable for grounding in large current welding of MIG, TIG, stud welding, electric resistance welding, submerged arc welding, etc.
ViaGasaFamido - Long service lifeour holder was made of high quality plastic material, high reliability. Wide applicationour products is a good helper for welding working which can make sure the safety. The upper and lower clips are made of composite material, which is resistant to high temperature and high flame retardant.
Jectse - The upper and lower clips are made of composite material, which is resistant to high temperature and high flame retardant. Ergonomically designed for comfort during welding. It is protected by strong spring insulation sleeve to ensure that the welding rod is stable and not easy to fall off. Use high-quality pure copper to increase the conductor, the conductivity is strong, and the temperature rise is lower. This is a good helper for welding working which can make sure the safety.
Bigking - Application scenarioapplicable for grounding in large current welding of MIG, stud welding, TIG, submerged arc welding, electric resistance welding, etc. Selected materialsthe clamp is made of die cast brass, with good electric conductivity and long durability. Easy to usesimple structure, easy to install and use. Multipurposewidely used in shipyard, steel structure, curtain wall industry, vehicle manufacturing, oil platform, auto parts and other industries. Professional productionThe product has passed strict factory tests to ensure superior quality.
